Products
All Products
Five-Axis Series-GLG Series - GLG-50-5XT
GLG-50-5XT Download
| TRAVEL | ||
| X axis | 600 / (23.6") | mm/(inch) |
| Y axis | 500 / (19.7") | mm/(inch) |
| Z axis | 450 / (17.7") | mm/(inch) |
| TILTING TABLE Fix on X axis block | ||
| Size: DIA | Ø200 | mm |
| Width of T-slot | 12H7 | |
| Rotary-axis | 360 | degree |
| Tilting-axis | +30～ -120 | degree |
| Max table load …………Horizontal position | 120 | Kgs |
| Max table load …………Vertical position | 60 | Kgs |
Specifications
- Machine characteristics
- video
- Specification Table
[Download]
*All specifications and designs are subject to change without notice.
| TRAVEL | ||
| X axis | 600 / (23.6") | mm/(inch) |
| Y axis | 500 / (19.7") | mm/(inch) |
| Z axis | 450 / (17.7") | mm/(inch) |
| TILTING TABLE Fix on X axis block | ||
| Size: DIA (mm) | Ø200 | mm/(inch) |
| Width of T-slot | 12H7 | |
| Rotary-axis(degree) | 360(degrees) | degrees |
| Tilting-axis(degree) | +30～ -120degrees | degrees |
| Max table load (Kgs)…Horizontal position | 120Kgs | kgs/ibs |
| Max table load (Kgs)…Vertical position | 60Kgs | kgs/ibs |
| AXES DRIVE MOTOR (FANUC/SIEMENS/HEIDENHAIN) | ||
| X axis Servo Motor | α8 / 1FK7063 / QSY155B | |
| Y axis Servo Motor | α8 / 1FK7063 / QSY155B | |
| Z axis Servo Motor | α22 / 1FK7083 / QSY155C | |
| Rotary Axis Servo Motor | α4 / 1FK7060 / QSY116C | |
| Tilting Axis Servo Motor | α8 / 1FK7063 / QSY116J | |
| SPINDLE | ||
| Spindle motor (FANUC / SIEMENS / HEIDENHAIN) | FANUC：αil8 (7.5KW/47.7Nm) SIEMENS：1PH8105 (7.5kw/45Nm) HEIDENHAIN：QAN200L (7.5kw/47.8NM ) |
|
| Taper size – standard | BT-40 (o.p. HSK-A63) | |
| Spindle Speed - Direct Drive | 12000/15000/18000 rpm | rpm |
| Spindle Speed - Built-in (Opt.) | HSKA63 / 20000/24000rpm | rpm |
| Spindle Speed - Built-in (Opt.) | BT-30 / 30000rpm | rpm |
| Spindle nose to table surface (mm/in) | 100~450mm(3.9"~17.7") | mm/(inch) |
| Spindle center to column surface (mm/in) | 560mm / (22") | mm/(inch) |
| FEEDRATE | ||
| Cutting feedrate(mm/min) for X,Y,Z | 1~12,000 (Depending on controller) | |
| Min. input increment | 0.001mm | |
| Rapid traverse rates (mm/min) X, Y, Z | 30/30/20 M/min , Option 48/48/30 M/min | |
| Ballscrews (X/Y/Z) (Dia. x pitch) | 40mmx12/40mmx12/40mmx10 | mm/(inch) |
| Linear roller guide X/Y/Z axes (mm) | 35x2set/35x2set/35x2set | |
| Machine Dimensions | ||
| Size: Width x Length x Hight (cm/in) | 260x250x200cm /(102.4"x98.4"x78.7") | cm/inch |