Products
All Products
GLG Series-GLG Series - GLG-2590
GLG-2590 Download
| TRAVEL | ||
| X-axis | 2500(98.4") | mm/(inch) |
| Y-axis | 900(35.4") | mm/(inch) |
| Z-axis | 730(28.7")opt | mm/(inch) |
| Spindle nose to table surface | 130-910 (5.1"-35.8") | mm/(inch) |
| Spindle center to column surface | 965(37.9") | mm/(inch) |
| X.Y.Z. Axis Ball screws dia | 50 x pitch12 | mm/(inch) |
| Table Size | 2600 x 800 (102.3" x 31.4") | mm/(inch) |
| Working Area | 2500x 900 (98.4" x 35.4") | mm/(inch) |
| Tee slots (CD x W x NO) | CD100 x 18 x 8 | mm/(inch) |
| Table load (maximun) | 4000(8800) | KG(Ibs) |
Specifications
- Machine characteristics
- video
- Specification Table
1 X,Y,Z-Axis linear roller guides for heavy loading
2. X travel over 1600mm, the base with 6 linear roller guides
3.Screw Type Chip Conveyor+Water Tank (Front)
Screw Type Automatic Chip Conveyor-2Pcs (Beside Y axis)
4. Spindle Cooling System
5. Functions of two water (oil) pumps :
one is for ① pressing chip flushing ② spindle splash ring ③ cutting coolant device: nozzle*2pcs and water gun
Structure
Quality
Spindel Torque
2. X travel over 1600mm, the base with 6 linear roller guides
3.Screw Type Chip Conveyor+Water Tank (Front)
Screw Type Automatic Chip Conveyor-2Pcs (Beside Y axis)
4. Spindle Cooling System
5. Functions of two water (oil) pumps :
one is for ① pressing chip flushing ② spindle splash ring ③ cutting coolant device: nozzle*2pcs and water gun
Structure
Quality
Spindel Torque
[Download]
*All specifications and designs are subject to change without notice.
| TRAVEL | ||
| X-axis | 2500(98.4") | mm/(inch) |
| Y-axis | 900(35.4") | mm/(inch) |
| Z-axis | 730(28.7")opt | mm/(inch) |
| Spindle nose to table surface | 110-840 (5.1"-35.8") | mm/(inch) |
| Spindle center to column surface | 965(37.9") | mm/(inch) |
| X.Y.Z. Axis Ball screws dia | 50 x pitch12 | mm/(inch) |
| TABLE | ||
| Table Size | 2600 x 800 (102.3" x 31.4") | mm/(inch) |
| Working Area | 2500x 900 (98.4" x 35.4") | mm/(inch) |
| Tee slots (CD x W x NO) | CD100 x 18 x 8 | mm/(inch) |
| Table load (maximun) | 4000(8800) | KG(Ibs) |
| SPINDLE | ||
| Spindle tapper | BT 50 / CAT 50 | |
| Spindle speed - standard access | RPM | |
| Compatible with various types of spindels - Belt drive |
8,000(std)/ 10,000(opt) -Belt drive | RPM |
| Compatible with various types of spindels - Direct drive Spindle |
opt 8,000 / 10,000 / 12,000 rpm-Direct drive | RPM |
| Compatible with various types of spindels - Built-in drive Spindle |
opt 12,000/ 15,000 rpm -Built-in | RPM |
| FEEDRATE | ||
| Cutting Feedrate (X, Y, Z axis) | 1-10000(Depending Controller) | MM/MIN |
| 3Axes Slideways | LINEAR BALL SLIDE, opt: LINEAR ROLL SLIDE | |
| Rapid Traverse Rates (X/Y/Z axis) | 24/24/24 | MM/MIN |
| ATC | ||
| Capacity-standard access. | 24 (Arm) | PCS |
| Capacity-optional access.(ARM) | 32/40(Chain Type) | PCS |
| Tool Selection | Bi-directional & min.path | |
| Maximum tool diameter x length | Armless Type: 80 x 250(3.1"x9.8"), Arm Type: 80 x 250(3.1"x9.8") | MM(inch) |
| Maximum tool weight | Armless6(13.2) / Arm 8(17.6) | KG(lbs) |
| Air Power required | 6KG/cm2 | |
| Tool Shank | BT50, ISO50 or CAT50 | |
| MOTOR | ||
| Spindle drive Motor | Std: 15KW(20HP), opt: 2 speed gear box 11KW(15HP) | KW(HP) |
| LINEAR BALL SLIDE | ||
| X/Y/Z axis | 45x2sets/30x6sets/45x2sets | KW(HP) |
| Carriage guide block-per axis | 6 / 12 / 6 blocks | |
| Coolant Pump | 1/2 | HP |
| Power Supply | 40KVA | |
| NET WEIGHT | 21000(46200) | KG(lbs) |
| SIZE | ||
| A | 750 | cm |
| B | 310 | cm |
| C | 210 | cm |
| D | 86 | cm |
| E (Belt/Direct Spindle) | 330/340/opt380 | cm |