Products

SPECIFICATION & FEATURES FOR DOUBLE COLUMN MACHINING CENTER
◎ 3 axes with Linear Guide ways - roller type provide with overall rigidity.
◎ Oil Cooling System for X.Y Axes Ballscrew.
◎ Patent No. 202004017403.0 was granted by Germany and 1059432 was granted by Spain for improvements in Y-axis (saddle) with three pieces of linear guide ways. The machining rate is increased by 25%.
◎ Z-axis (Head) with 4 pieces of Linear Guide ways enabling more stability while cutting.
◎ Screw Chip Conveyor system on both sides of bed (X-axis), to help to remove chips out of the bed, avoiding thermal growth.
◎ Patent No. 202004019862.2 and 202004019861.4 were granted by Germany for improvements on the radial ribbing design to absorb both the radial and axial forces to achieve rigid machine.
◎ Patent No. 202004019861.4 were granted by Germany for improvements on pollution-preventive mechanism on the bed.



Structure/


Quality
​

Spindel Torque

 

[Download]

TRAVEL
X axis	5000 / 196.9˝	mm/(inch)
Y axis	2100 +480 / (82.6˝ +18.8˝)	mm/(inch)
Z axis	1000 / 39.4˝	mm/(inch)
Distance between columns	2200 / 86.6˝	mm/(inch)
Table
Dimension	5200 x 1800 / (294.7˝x70.8˝)	mm/(inch)
Working area                 (without tool length)	4520 x 2100 /  (178˝x82.6˝)	mm/inch
T-Slot (W x No. x CD)	22 x 10 x 200	mm
Max. Table load	15000 / 33000	kgs / lbs
Spindle
Spindle speed (Built-in type)	18000 RPM	rpm
Spindle motor (Built-in type) / Torque Max.	29.5kw / 70.4NM	kw/NM
Spindle Taper	HSK A63
Feedrate
Cutting feed	1-10,000 (DEPENGING ON CONTROLLER)	mm
X/Y axis rapid traverse(o.p.)	16	M
Z axis rapid traverse(o.p.)	12	M
X axis servo motor	HEIDENHAIN : X, Y axis: QSY-190D 9.6kw 38NM Z axis: QSY-190C 7.2kw 28NM(+Nitrogen balance)	NM
Y/Z axis servo motor X/Y/Z axis with Gear reducer	SIEMENS : X,Y axis: 1FK7103 5.37kw 36NM Z axis: 1FK7101 4.87kw 27NM ( +Nitrogen balance)	NM
Linear guide (Roller Type)
X axis	X:65x2sets	rpm​
Y axis	Y:45x2sets + 35x1set	rpm
Z axis	Z:55x2sets + 45x2sets	rpm
Ballscrew
X axis ballscrew dia x pitch	80 x 16	mm/(in)
Y axis ballscrew dia x pitch	50 x 12	mm/(in)
Z axis ballscrew dia x pitch	45 x 12	mm/(in)
ATC
Type of tool(HSK63A/BT40)          Tool capacity	12(OP) 16/20	Armless斗笠式
Type of tool(for BT40/BT50)                              Tool capacity	24/30 (Disc type)	Arm刀臂式
Type of tool(for BT40/BT50)                              Tool capacity	32/40/60/80/120 (Chain type)
Maximum tool diameter	24T(BT40) : 78(3.1˝) / 24T(BT50) : 110(4.3˝)	mm/inch
Maximum tool length	24T(BT40) : 300(11.8˝) / 24T(BT50) : 350(13.8˝)	mm/inch
Maximum tool weight	8(17.63) / 20(44)	kgs / lbs
Tool to tool time	1.8 / 2.5	sec
Air supply	6	kg / c㎡
Power supply	45	KVA
Coolant pump	1HP x 2pcs	HP
Machine weight (net)	41000 / 90200	kgs / lbs
Raiser block 200mm(O.P.)	x	mm
Raiser block 500mm(O.P.)	x	mm

*All specifications and designs are subject to change without ​ notice.