Products

DMC Series-26 Series - DMC-4026

DMC-4026 Download


Travel    
X-axis 4000(157") mm/(inch)
Y-axis 2500(98.4") mm/(inch)
Z-axis 1000(39.4") mm/(inch)
Z axis(O.P.) Option 1100mm(43.3") 1300mm(51.2") 1500mm(59") mm/(inch)
Spindle nose to table surface 120~1120(4.7~44.1") mm/(inch)
Distance between columns 2600/102.3 mm/(inch)
Table Dimension 4200 x 2150(165.3 x 84.6") mm/(inch)
Spindle speed (Built-in type) BT50 (8000 / 10000 / 12000rpm) RPM
Spindle motor (Built-in type) / Torque Max. FANUC αB160LL(30kw), L:350NM, H:95NM kw/NM


Specifications

  • Machine characteristics
  • video
  • Specification Table
SPECIFICATION & FEATURES FOR DOUBLE COLUMN MACHINING CENTER
1.  3 axes with Linear Guide ways - roller type provide with overall rigidity.
2.Oil Cooling System for X.Y Axes Ballscrew.
3.Patent No. 202004017403.0 was granted by Germany and 1059432 was granted by Spain for improvements in Y-axis (saddle) with three pieces of linear guide ways. The machining rate is increased by 25%.
4.Z-axis (Head) with 4 pieces of Linear Guide ways enabling more stability while cutting.
5.Screw Chip Conveyor system on both sides of bed (X-axis), to help to remove chips out of the bed, avoiding thermal growth.
6.Patent No. 202004019862.2 and 202004019861.4 were granted by Germany for improvements on the radial ribbing design to absorb both the radial and axial forces to achieve rigid machine.
7.Patent No. 202004019861.4 were granted by Germany for improvements on pollution-preventive mechanism on the bed.


Structure

Quality

Spindel Torque

Change Head System



Control system &Options
 
 
[Download]
Travel    
X-axis 4000(157") mm/(inch)
Y-axis 2500(98.4") mm/(inch)
Z-axis 1000(39.4") mm/(inch)
Z axis(O.P.) Option 1100mm(43.3") 1300mm(51.2") 1500mm(59") mm/(inch)
Spindle nose to table surface 120~1120(4.7~44.1") mm/(inch)
Distance between columns 2600/102.3 mm/(inch)
Table    
Dimension 4200 x 2150(165.3 x 84.6") mm/(inch)
Working area 4000 x 2460(157 x 96.8") mm/(inch)
T-Slot (W x No. x CD) 22 x 11 x 200 mm/(inch)
Max. Table load 15000/33000 KG(Ibs)
Spindle    
Spindle speed (Built-in type) BT50 (8000 / 10000 / 12000rpm) RPM
Spindle motor (Built-in type) / Torque Max. FANUC αB160LL(30kw), L:350NM, H:95NM kw/NM
Spindle Taper HSK-100 / BT50 DIN69871  
Spindle speed (Direct Drive) BT50: 8,000/10,000/12,000rpm RPM
Controller Fanuc/Mitsubishi/Siemens  
Dual-speed spindle motor Kw-Nm(L/H) (Direct Drive) 1.Fanuc- ①αT15 / ②αL15/ ③αL26 / ④ αB160LL 
① αT15        18.5Kw-12000rpm         L:102Nm   H:28.6Nm
② αL15        18.5Kw-15000rpm         L:150Nm   H:35Nm
③ αL26        (18.5-22kw) 10000rpm  L:286Nm   H:88Nm
④ αB160LL (30kw) 10000rpm           L:350Nm   H:95Nm
----------------------------------------------
2.Mitsubishi-   SJ-VKRS30-06ZM  
  22Kw-10000rpm            L:286Nm   H:88Nm
----------------------------------------------
3.Siemens-      1PM6138-2LF8
  22Kw-10000rpm            L:140Nm   H:53Nm
Kw/Nm
α22+ZF Gear Box α30+ZF(Direct Drive) (After Mounting Gear Box)
H:8000rpm/140NM
L:2000rpm/560NM
(1:4)
SJ-V26+ZF Gear Box(Direct Drive) (After Mounting Gear Box, the torque increase 4 times at low speed)
H:8000rpm/286NM
L:700rpm/1140NM
(1:4)
Spindle Taper (o.p.) BT50/DIN69871  
Feedrate    
Cutting feed 1-10,000(DEPENDING ON CONTROLLER) mm
X/Y axis rapid traverse(o.p.) 12000 mm
Z axis rapid traverse(o.p.) 12000 mm
X axis servo motor 30 (Two motors) NM
Y/Z axis servo motor 22/22 (Z axis Hydraulic Balance) NM
Linear guide (Roller Type)    
X/Y/Z axis X:65x2sets / Y:45x2sets 35x1set / Z:55x2sets 45x2sets mm
Ballscrew    
X axis ballscrew dia x pitch 63 x 12 mm
Y axis ballscrew dia x pitch 50 x 12 mm
Z axis ballscrew dia x pitch 45x12  
A.T.C.    
Type of tool(HSK63A/BT40) Armless type Armless
Tool capacity 12(OP)16/20  
Type of tool(for BT40/BT50) Arm Arm
Tool capacity 24/30(Disc type) 32/40/60/80/120(Chain type)  
Maximum tool diameter 24T(BT40) : 135 (5.3")
24T(BT50) : 160 (6.3")
mm/inch
Maximum tool length 24T(BT40) : 300 (11.8")
24T(BT50) : 400 (15.7")
mm/inch
Maximum tool weight 8 (17.63) / 20 (44) kgs/lbs
Tool to tool time 1.8 / 2.5 Sec
Air supply 6 kg/cm2
Power supply 40 KVA
Coolant pump 1HP x 2pcs HP
Machine weight (net) 45,500/100,100 kgs/lbs
Raiser block 200mm(O.P.) mm
Raiser block 500mm(O.P.) mm
*All specifications and designs are subject to change without notice.