Products

SPECIFICATION & FEATURES FOR DOUBLE COLUMN MACHINING CENTER
1.  3 axes with Linear Guide ways - roller type provide with overall rigidity.
2.Oil Cooling System for X.Y Axes Ballscrew.
3.Patent No. 202004017403.0 was granted by Germany and 1059432 was granted by Spain for improvements in Y-axis (saddle) with three pieces of linear guide ways. The machining rate is increased by 25%.
4.Z-axis (Head) with 4 pieces of Linear Guide ways enabling more stability while cutting.
5.Screw Chip Conveyor system on both sides of bed (X-axis), to help to remove chips out of the bed, avoiding thermal growth.
6.Patent No. 202004019862.2 and 202004019861.4 were granted by Germany for improvements on the radial ribbing design to absorb both the radial and axial forces to achieve rigid machine.
7.Patent No. 202004019861.4 were granted by Germany for improvements on pollution-preventive mechanism on the bed.
​

Structure

Quality
​
Spindel Torque

Change Head System

​
​Control system &Options
​

[Download]

Travel
X-axis	4000(157")	mm/(inch)
Y-axis	2100(82.6")	mm/(inch)
Z-axis	1000(39.4")	mm/(inch)
Z axis(O.P.)	Option 1100mm(43.3") 1300mm(51.2") 1500mm(59")	mm/(inch)
Spindle nose to table surface	120~1120(4.7~44.1")	mm/(inch)
Distance between columns	2200/86.6	mm/(inch)
Table
Dimension	4200 x 1800(165 x 70.8")	mm/(inch)
Working area	4000 x 2060(157 x 81")	mm/(inch)
T-Slot (W x No. x CD)	22 x 10 x 200	mm/(inch)
Max. Table load	10000/22000	KG(Ibs)
Spindle
Spindle speed (Built-in type)	BT50 (8000 / 10000 / 12000rpm)	RPM
Spindle motor (Built-in type) / Torque Max.	FANUC αB160LL(30kw), L:350NM, H:95NM	kw/NM
Spindle Taper	HSK-100 / BT50 DIN69871
Spindle speed (Direct Drive)	BT50: 8,000/10,000/12,000rpm	RPM
Controller	Fanuc/Mitsubishi/Siemens
Dual-speed spindle motor Kw-Nm(L/H) (Direct Drive)	1.Fanuc- ①αT15 / ②αL15/ ③αL26 / ④ αB160LL  ① αT15        18.5Kw-12000rpm         L:102Nm   H:28.6Nm ② αL15        18.5Kw-15000rpm         L:150Nm   H:35Nm ③ αL26        (18.5-22kw) 10000rpm  L:286Nm   H:88Nm ④ αB160LL (30kw) 10000rpm           L:350Nm   H:95Nm ---------------------------------------------- 2.Mitsubishi-   SJ-VKRS30-06ZM     22Kw-10000rpm            L:286Nm   H:88Nm ---------------------------------------------- 3.Siemens-      1PM6138-2LF8   22Kw-10000rpm            L:140Nm   H:53Nm	Kw/Nm
α22+ZF Gear Box α30+ZF(Direct Drive)	(After Mounting Gear Box) H:8000rpm/140NM L:2000rpm/560NM	(1:4)
SJ-V26+ZF Gear Box(Direct Drive)	(After Mounting Gear Box, the torque increase 4 times at low speed) H:8000rpm/286NM L:700rpm/1140NM	(1:4)
Spindle Taper (o.p.)	BT50/DIN69871
Feedrate
Cutting feed	1-10,000(DEPENDING ON CONTROLLER)	mm
X/Y axis rapid traverse(o.p.)	16000	mm
Z axis rapid traverse(o.p.)	12000	mm
X axis servo motor	30 (Two motors)	NM
Y/Z axis servo motor	22/22 (Z axis Hydraulic Balance)	NM
Linear guide (Roller Type)
X/Y/Z axis	X:65x2sets / Y:45x2sets 35x1set / Z:55x2sets 45x2sets	mm
Ballscrew
X axis ballscrew dia x pitch	63 x 16	mm
Y axis ballscrew dia x pitch	50 x 12	mm
Z axis ballscrew dia x pitch	45x12
A.T.C.
Type of tool(HSK63A/BT40)	Armless type	Armless
Tool capacity	12(OP)16/20
Type of tool(for BT40/BT50)	Arm	Arm
Tool capacity	24/30(Disc type) 32/40/60/80/120(Chain type)
Maximum tool diameter	24T(BT40) : 135 (5.3") 24T(BT50) : 160 (6.3")	mm/inch
Maximum tool length	24T(BT40) : 300 (11.8") 24T(BT50) : 400 (15.7")	mm/inch
Maximum tool weight	8 (17.63) / 20 (44)	kgs/lbs
Tool to tool time	1.8 / 2.5	Sec
Air supply	6	kg/cm2
Power supply	40	KVA
Coolant pump	1HP x 2pcs	HP
Machine weight (net)	36,500/80,300	kgs/lbs
Raiser block 200mm(O.P.)	─	mm
Raiser block 500mm(O.P.)	─	mm

*All specifications and designs are subject to change without notice.