Products

SPECIFICATION & FEATURES FOR DOUBLE COLUMN MACHINING CENTER
1.  3 axes with Linear Guide ways - roller type provide with overall rigidity.
2.Oil Cooling System for X.Y Axes Ballscrew.
3.Patent No. 202004017403.0 was granted by Germany and 1059432 was granted by Spain for improvements in Y-axis (saddle) with three pieces of linear guide ways. The machining rate is increased by 25%.
4.Z-axis (Head) with 4 pieces of Linear Guide ways enabling more stability while cutting.
5.Screw Chip Conveyor system on both sides of bed (X-axis), to help to remove chips out of the bed, avoiding thermal growth.
6.Patent No. 202004019862.2 and 202004019861.4 were granted by Germany for improvements on the radial ribbing design to absorb both the radial and axial forces to achieve rigid machine.
7.Patent No. 202004019861.4 were granted by Germany for improvements on pollution-preventive mechanism on the bed.
​

Structure

Quality
​
Spindel Torque

Change Head System

​
​Control system &Options
​

[Download]

Travel
X-axis	2200(86.6")	mm/(inch)
Y-axis	1100(43.3")	mm/(inch)
Z-axis	700(27.5")	mm/(inch)
Z axis(O.P.)		mm/(inch)
Spindle nose to table surface	100~800(3.9~31.4")	mm/(inch)
Distance between columns	1200/47.2	mm/(inch)
Table
Dimension	2300x900(90.5 x 35.4")	mm/(inch)
Working area	2200x1060(86.6 x 41.7")	mm/(inch)
T-Slot (W x No. x CD)	22 x 7 x 125	mm/(inch)
Max. Table load	4000/3740	KG(Ibs)
Spindle
Spindle speed (Built-in type)	18,000/20,000(O.P.)	RPM
Spindle motor (Built-in type) / Torque Max.	18kw / 80NM	kw/NM
Spindle Taper	HSK 63A
Spindle speed (Direct Drive)	BT40: 12,000 / 15,000 BT50:8,000/10,000/12,000rpm(O.P.)	RPM
Controller	Fanuc/Mitsubishi/Siemens
Dual-speed spindle motor Kw-Nm(L/H) (Direct Drive)	1.Fanuc- ①αT8 / ②αT15 / ③αL15/④ αL26 / ⑤ αB160LL / ⑥ αL8  ① αT8  7.5Kw-15000rpm    L:47Nm    H:23.9Nm ② αT15  18.5Kw-12000rpm  L:102Nm   H:28.6Nm ③ αL15  18.5Kw-15000rpm  L:150Nm   H:35Nm ④ αL26  (18.5-22kw) 10000rpm  L:286Nm   H:88Nm ⑤ αB160LL (30kw)    10000rpm  L:350Nm   H:95Nm ⑥ αL8  11-15Kw-20000rpm       L:79.5Nm  H:23.9Nm ---------------------------------------------- 2.Mitsubishi-   SJ-VKRS30-06ZM   22Kw-10000rpm  L:286Nm  H:88Nm ---------------------------------------------- 3.Siemens-      1PM6138-2LF8 22Kw-10000rpm  L:140Nm  H:53Nm	Kw/Nm
α22+ZF Gear Box α30+ZF(Direct Drive)	(After Mounting Gear Box) H:8000rpm/140NM L:2000rpm/560NM	(1:4)
SJ-V26+ZF Gear Box(Direct Drive)	(After Mounting Gear Box, the torque increase 4 times at low speed) H:8000rpm/286NM L:700rpm/1140NM	(1:4)
Spindle Taper (o.p.)	BT40/DIN69871 / BT50/DIN69871(O.P.)
Feedrate
Cutting feed	1-10,000(DEPENDING ON CONTROLLER)	mm
X/Y axis rapid traverse(o.p.)	20,000(36,000)	mm
Z axis rapid traverse(o.p.)	20,000(36,000)	mm
X axis servo motor	22	NM
Y/Z axis servo motor	22/30	NM
Linear guide (Roller Type)
X/Y/Z axis	X:45x2sets / Y:45x2sets 25x1set / Z:45x2sets	mm
Ballscrew
X axis ballscrew dia x pitch	50 x 12	mm
Y axis ballscrew dia x pitch	50 x 12	mm
Z axis ballscrew dia x pitch	45x10
A.T.C.
Type of tool(HSK63A/BT40)	Armless type	Armless
Tool capacity	12(OP)16/20
Type of tool(for BT40/BT50)	Arm	Arm
Tool capacity	24/30(Disc type) 32/40/60/80/120(Chain type)
Maximum tool diameter	24T(BT40) : 135 (5.3") 24T(BT50) : 160 (6.3")	mm/inch
Maximum tool length	24T(BT40) : 300 (11.8") 24T(BT50) : 400 (15.7")	mm/inch
Maximum tool weight	8 (17.63) / 20 (44)	kgs/lbs
Tool to tool time	1.8 / 2.5	Sec
Air supply	6	kg/cm2
Power supply	35	KVA
Coolant pump	1HP x 2pcs	HP
Machine weight (net)	14,200/31,240	kgs/lbs
Raiser block 200mm(O.P.)	310~865	mm
Raiser block 500mm(O.P.)	610~1165	mm

*All specifications and designs are subject to change without notice.