Products
All Products
Five-Axis Series-GLG Series - GLG-80-5XT
GLG-80-5XT Download
| TRAVEL | ||
| X axis | 900 / (35.4") | mm/(inch) |
| Y axis | 800 / (31.5") | mm/(inch) |
| Z axis | 600 / (23.6") | mm/(inch) |
| TILTING TABLE Fix on X axis block | LCM from Italy | |
| Size: DIA | Ø600 / Square 500 | mm |
| Width of T-slot | 14H7 | |
| Rotary-axis | 360 | degree |
| Tilting-axis | +30～ -120 | degree |
| Max table load …………Horizontal position | 500 | Kgs |
| Max table load …………Vertical position | 500 | Kgs |
Specifications
- Machine characteristics
- video
- Specification Table
[Download]
*All specifications and designs are subject to change without notice.
| TRAVEL | ||
| X axis | 900 / (35.4") | mm/(inch) |
| Y axis | 800 / (31.5") | mm/(inch) |
| Z axis | 900 / (35.4") | mm/(inch) |
| TILTING TABLE Fix on X axis block | ||
| Size: DIA (mm) | Ø600 / Square 500 | mm/(inch) |
| Width of T-slot | 14H7 | |
| Rotary-axis(degree) | 360(degrees) | degrees |
| Tilting-axis(degree) | +30～ -120degrees | degrees |
| Max table load (Kgs)…Horizontal position | 500Kgs | kgs/ibs |
| Max table load (Kgs)…Vertical position | 500Kgs | kgs/ibs |
| AXES DRIVE MOTOR (FANUC/SIEMENS/HEIDENHAIN) | ||
| X axis Servo Motor | α30 / 1FK7101 / QSY190C | |
| Y axis Servo Motor | α30 / 1FK7101 / QSY190C | |
| Z axis Servo Motor | α30 / 1FK7101 / QSY190C | |
| Rotary Axis Servo Motor | α8 / 1FK7063 / QSY155B | |
| Tilting Axis Servo Motor | α22 / 1FK7083 / QSY155B | |
| SPINDLE | ||
| Spindle motor (FANUC / SIEMENS / HEIDENHAIN) | FANUC：αiI15 (15KW/95.4Nm) SIEMENS：1PH8133 (15kw/96Nm) HEIDENHAIN：QAN260M (15kw/ 96NM) |
|
| Taper size – standard | BT-40 (o.p. HSK-A63) | |
| Spindle Speed - Direct Drive | 12000/15000/18000 rpm | rpm |
| Spindle Speed - Built-in (Opt.) | HSKA63 / 20000/24000rpm | rpm |
| Spindle Speed - Built-in (Opt.) | BT-30 / 30000rpm | rpm |
| Spindle nose to table surface (mm/in) | 100~600mm(3.9"~23.6") | mm/(inch) |
| Spindle center to column surface (mm/in) | 935mm / (36.8") | mm/(inch) |
| FEEDRATE | ||
| Cutting feedrate(mm/min) for X,Y,Z | 1~12,000 (Depending on controller) | |
| Min. input increment | 0.001mm | |
| Rapid traverse rates (mm/min) X, Y, Z | 30/30/20 M/min , Option 48/48/30 M/min | |
| Ballscrews (X/Y/Z) (Dia. x pitch) | 50x12mm/50x12mm50x12mm | mm/(inch) |
| Linear roller guide X/Y/Z axes (mm) | 45x2set/30x6set/45x2set | |
| Machine Dimensions | ||
| Size: Width x Length x Hight (cm/in) | 320x280x350cm / (126"x110"x137.8") | cm/inch |