Home >> Category list >> GLG Series >> GLG-1020
GLG Series
GLG-1020
 
 
  GLG-1020
 
TRAVEL:

X-axis: 1020 mm (40.2")
Y-axis: 530 mm (20.9")
Z-axis: 610 mm (24")

 
Description UNIT GLG-1020
  TRAVEL
  X-axis MM( inch )  1020 (40)
  Y-axis MM( inch )  530 (21)
  Z-axis MM( inch )  610 (24)
  Spindle nose to table surface MM( inch ) 100-600
(3.9~23.6)
  Spindle center to column surface MM( inch )  550 (21.6)
  X.Y.Z axis Ball screws dia MM  40 x pitch12
  TABLE
  Table size MM( inch ) 1100*510
(43 * 20)
  Working Area MM( inch ) 1020*530
(40 * 20.9)
  Tee Slots (CD x W x No.) MM  CD 100x18x4
  Max. Table Load KG( lbs )  800 (1760)
  Spindle
  Spindle tapper   BT40 / CAT40
  Spindle speed-standard access rpm BT30 / 12,000
opt. 15,000 (Belt drive)
  Belt drive rpm BT40 8,000/opt. 10,000
15,000(Belt drive)
  Driect Drive rpm opt. 10,000/12,000/15,000
20,000/24,000-Direct drive
  Built-in Drive rpm opt. 20,000/24,000
30,000-Built-in
  Feed Rate
  Cutting feedrate mm/min 1-10,000
Depending on the controller
  3-axes slideways   Linear Ball Slide
  Rapid transverse rates(X,Y,Z) m/min 30,000/30,000/20,000
opt. 48,000/48,000/20,000
  A.T.C
  Capacity-standard access pcs 16(Armless)
opt. 24(Armless)
  Capacity-optional access pcs 24/30(Disc type)
32/40(Chain type)
  Tool selection   Bi-directional & min. path
  Max. tool diameter x length MM( inch ) Armless:90*200
  Max. tool weight KG(lbs) 6 (13.2)
  Air power required   6 kg/c
  Tool shank   BT30/ISO30/BT40
ISO40/CAT40
  Motor
  Spindle drive motor kw(HP) Std:7.5kw(10HP)
opt.11kw(15HP)
  Linear Ball Slide
  X,Y,Z axis   35 / 35 / 35
  Carriage guide block-per axis   4
  Coolant pump HP 1/2
  Power supply    20KVA
  Net wight KG(lbs)  5,300 (11,660)