Home >> Category list >> GLG Series >> GLG-1680
GLG Series
GLG-1680
 
 
  GLG-1680
 
TRAVEL:

X-axis: 1600 mm (63")
Y-axis: 800 mm (31.5")
Z-axis: 730 mm (28.7")

 
Description UNIT GLG-1680
  TRAVEL
  X-axis MM( inch )  1600 (62.9)
  Y-axis MM( inch ) 800 (31.5)
  Z-axis MM( inch )   730 (28.7)
  Spindle nose to table surface MM( inch ) 100-830
(3.9~32.6)
  Spindle center to column surface MM( inch ) 875 (34.4)
  X.Y.Z axis Ball screws dia MM   50 x pitch12
  TABLE
  Table size MM( inch ) 1700*800
(66.9 * 31.5)
  Working Area MM( inch ) 1600*800
(63 * 31.5)
  Tee Slots (CD x W x No.) MM   CD 100x18x8
  Max. Table Load KG( lbs )  2000 (4400)
  Spindle
  Spindle tapper   BT50 / CAT50
  Spindle speed-standard access rpm -
  Belt drive rpm 8,000(std)
10,000(opt) -Belt drive
  Driect Drive rpm opt. 8,000/10,000/12,000
-Direct drive
  Built-in Drive rpm opt. 12,000/20,000
-Built-in
  Feed Rate
  Cutting feedrate mm/min 1-10,000
Depending on the controller
  3-axes slideways  

Linear Ball Slide

opt. Linear Roll Slide

  Rapid transverse rates(X,Y,Z) m/min 20,000/20,000/15,000
  A.T.C
  Capacity-standard access pcs 16(Armless)
  Capacity-optional access pcs std: 24(Disc type)
opt: 32/40(Tools)
  Tool selection   Bi-directional & min. path
  Max. tool diameter x length MM( inch )

Armless:89*250(3.5*9.8)

Arm:80*250(3.14*9.8)

  Max. tool weight KG(lbs) 6 (13.2)
  Air power required   6 kg/c
  Tool shank   BT50/ISO50
  or CAT50
  Motor
  Spindle drive motor kw(HP) std:15kw(20HP)
opt. ZF gear box11kw(15HP)
  Linear Ball Slide
  X,Y,Z axis   45 / 45 / 45
  Carriage guide block-per axis   4
  Coolant pump HP 1/2
  Power supply     30KVA
  Net wight KG(lbs)  12,500 (27,500)