Home >> Category list >> GLG Series >> GLG-610
GLG Series
GLG-610
 
 
  GLG-610
 
TRAVEL:

X-axis: 610 mm (24")
Y-axis: 460 mm (18.1")
Z-axis: 480 mm (18.9")

 
Description UNIT GLG-610
  TRAVEL
  X-axis MM( inch ) 610 (24)
  Y-axis MM( inch ) 460 (18.1)
  Z-axis MM( inch ) 480 (18.9)
  Spindle nose to table surface MM( inch ) 100-580
(3.9~22.8)
  Spindle center to column surface MM( inch ) 500(19.6)
  X.Y.Z axis Ball screws dia MM 32*12 pitch
16mm(opt)
  TABLE
  Table size MM( inch ) 700 * 460
(27.5 * 18.1)
  Working Area MM( inch ) 610 * 450
(24 * 17.7)
  Tee Slots (CD x W x No.) MM CD100 x 18 x 3
  Max. Table Load KG( lbs ) 300
  Spindle
  Spindle tapper   BT30 / BT40
  Spindle speed-standard access rpm BT30 / 12,000
opt. 15,000 (Belt drive)
  Belt drive rpm BT40 8,000/opt. 10,000
15,000(Belt drive)
  Driect Drive rpm opt. 10,000/12,000/15,000
20,000/24,000-Direct drive
  Built-in Drive rpm opt. 20,000/24,000
30,000-Built-in
  Feed Rate
  Cutting feedrate mm/min 1-10,000
Depending on the controller
  3-axes slideways   Linear Ball Slide
  Rapid transverse rates(X,Y,Z) m/min 30,000/30,000/20,000
opt. 48,000/48,000/20,000
  A.T.C
  Capacity-standard access pcs 16(Armless)
/ opt. 24(Armless)
  Capacity-optional access pcs 24/30(Disc type)
32/40(Chain type)
  Tool selection   Bi-directional & min. path
  Max. tool diameter x length MM( inch ) Armless:90*200
  Max. tool weight KG(lbs) 6 (13.2)
  Air power required   6 kg/c
  Tool shank   BT30/ISO30/BT40
ISO40/CAT40
  Motor
  Spindle drive motor kw(HP) Std:7.5kw(10HP)
opt.11kw(15HP)
  Linear Ball Slide
  X,Y,Z axis   25 / 25 / 30
  Carriage guide block-per axis   4
  Coolant pump HP 1/2
  Power supply   15KVA
  Net wight KG(lbs) 3,500 (7,700)