Home >> Category list >> GMC Series >> GMC-1265
GMC Series
GMC-1265
 
 
  GMC-1265
 
TRAVEL:

X-axis: 1200 mm (47.2")
Y-axis: 650 mm (25.6")
Z-axis: 650 mm (25.6")

 
Description UNIT GMC-1265
  TRAVEL
  X-axis MM( inch ) 1200 (47.2)
  Y-axis MM( inch ) 650 (27.6)
  Z-axis MM( inch ) 650 (27.6)
  Spindle nose to table surface MM( inch ) 100-710
(3.9~27.9)
  Spindle center to column surface MM( inch ) 740 (29.1)
  X.Y.Z axis Ball screws dia MM 40xpitch12
  TABLE
  Table size MM( inch ) 1260 * 600
(49.6 * 23.6)
  Working Area MM( inch ) 1200 * 650
(47.2 * 25.6)
  Tee Slots (CD x W x No.) MM CD 100x18x5
  Max. Table Load KG( lbs ) 1200 (2640)
  Spindle
  Spindle tapper   BT40 / ISO40 / CAT40
opt. BT No.50 / CAT50
  Belt drive rpm BT40:10,000(standard)
BT50:8,000(opt.)
  Driect Drive rpm BT40/HSK63A: 10000/12000/15000/18000 rpm
BT50/HSK100A: 8000/10000/12000 rpm
  Built-in Drive rpm BT40/HSK63A: 18000/24000/30000 rpm
BT50/HSK100A: 8000/10000/12000 rpm
  Feed Rate
  Cutting feedrate mm/min 1-10,000
Depending on the controller
  3-axes slideways   Hardened ground
  Rapid transverse rates(X,Y,Z) m/min 24000/24000/15000
  A.T.C
  Capacity-standard access pcs

16(armless)

Option 24(armless)

  Capacity-optional access pcs 24/30(Disc type)
32/40(Chain type)
  Tool selection   Bi-directional & min. path
  Max. tool diameter x length MM( inch ) Armless type:89*250(3.5*9.8)
Arm type:80*250(3.14*9.8)
  Max. tool weight KG(lbs) 6 (13.2)
  Air power required   6 kg/c
  Tool shank   BT40/ISO40/CAT40
(opt.)ISO50/CAT50
  Motor
  Spindle drive motor kw(HP) std:7.5kw(10HP)
opt.ZF gear box 11kw(15HP)
  Coolant pump HP 1/2
  Power supply   STD:20KVA
  Net wight KG(lbs) 7700(16940)